Maintenance criteria: 1) the nature of the maintenance cycle maintenance repair overhaul minor repairs in the period of 3 months maintenance station 8 hours 32 hours small repair content ① check the adjustment lever transit is good for 2 years. ② Check whether the operating parts of the card hit phenomenon. ③ Check the lubrication or cleaning fuel. ④ Check the coupling element or replacement bolts. ⑤ Check the belt pulleys or replacement. The repair contents ① including small repair content. ② Check or replace the disc liner. ③ repair or replace scraper ring plate, cutting gate. ④ Check the worm gear or replace gears, bearings. ⑤ repair or replace the rotary shaft. Idling disc feeder experiment two hours disc feeder quotes and check the following items in accordance with the technical requirements of the instructions on the use of: (1) Check the rotation direction of the disk, in order to determine whether the correct motor cable (2) Check. Have periodic noise and vibration disc feeder, check for leakage. (3) Check the bearing temperature and oil temperature conditions. (4) Adjust the blade to the two extreme positions, checking the blade and the disc The gap is between 15-25 mm. After completion of the empty load test load test should be carried out eight hours disc feeder manufacturers, check for anomalies, and check the adjustment means is flexible and reliable, everything is normal, can be put into produce. Disc feeder disc feeder Shanxi _ _ Oswald Chen Xinxiang machinery supplied by Oswald Chen Machinery Co., Ltd. Oswald Xinxiang Chen Machinery Co., Ltd. (www.oweicjx.com) strong, credible, in Xinxiang of transportation equipment industry has accumulated a large number of loyal customers. The company better work attitude and constantly improving innovative ideas will lead Oswald Chen mechanical and you hand in hand into the brilliant, for a better future!