Idling disc feeder experiment two hours, and check the following items in accordance with the instructions on the use of technology requirements: (1) Check the rotation direction of the disk, Wuxi disc feeder, in order to determine the motor cable correctly (2). Check for periodic noise and vibration, disc feeder, check for leakage. (3) Check the bearing temperature and oil temperature conditions. (4) Adjust the blade to the two extreme positions, checking scraper whether the gap between the disc 15-25 mm. After completion of the empty load test load test should be carried out eight hours, disc feeder quotes, check for anomalies, and check the adjustment means is flexible and reliable, everything is normal be put into production. Disc feeder installation and commissioning 1, according to the center to find a good position silo, its center distance deviation of not more than 5 mm 2, the disc must be in a horizontal position, the deviation not greater than 0.5 / 1000 was then fixed channel column in the lower part of the hopper, the feeding tube connected to the screw brake. 3, the hand plate moving belt, checking operation is flexible. 4. Check the turbine deceleration lubrication inside the 4 height and inject the right amount of lubricating oil lubrication points. Disc feeder works, Oswald Chen Machinery (online consultation), Wuxi disc feeder provided by Xinxiang Chen Machinery Co. Oswald. Oswald Xinxiang Chen Machinery Co., Ltd. (www.oweicjx.com) is an industry leader in Henan Xinxiang, transportation equipment, over the years, the company is implementing the scientific management, innovation and development, the principle of honesty and trustworthiness, and satisfy customer needs. In Oswald Chen mechanical leadership with the staff warmly welcome all inquiries negotiations to create Oswald Chen Machinery better future.