Disc: ①, disk center and silo center tolerance ≤5mm (according to bin center to find a good location). ②, the disc surface must be level, its tolerance ≤0.5mm / m. ③, disk space and cutting the sleeve to ensure that within the range of 25 ~ 30mm. Disc liner material: ZG40Mn2 manganese steel liner (code Mn), diabase liner (code H) and steel trays (code G), three. Scraper plate: the ordinary carbon steel disc feeder features, and lined with wear-resistant liner 16Mn, installation angle can be adjusted, bolted, Xinyang disc feeder, the disk space that the disc It may also be suitably adjusted (15 ~ 25mm). Influence disc feeder to the size of the opening height quantity factor 1 to control and adjust the charging door to the main measures is to determine the size of the quantity, the greater the charge door opening height greater material flow, whereas the reducing material flow; 2 sets drum height there are bulk materials also have an impact on the discharge, the operation should be kept at a constant height of materials, small disc feeder, avoid biased material phenomenon barrel. 3 material particle size and moisture of the discharged amount also affect the particle size is too small or moisture over the General Assembly so that the cylinder wall and the disc sticky material impact on the stability of the material. 4 disk rotational speed: disc to the feeding amount proportional to the speed of the feeder, the greater the speed, the greater the ability to feed a small disc feeder | Oswald Chen Machinery (Online) | Xinyang disc to feeder provided by Xinxiang Chen Machinery Co. Oswald. Oswald Xinxiang Chen Machinery Co., Ltd. (www.oweicjx.com) is an industry leader in Henan Xinxiang, transportation equipment, over the years, the company is implementing the scientific management, innovation and development, the principle of honesty and trustworthiness, and satisfy customer needs. In Oswald Chen mechanical leadership with the staff warmly welcome all inquiries negotiations to create Oswald Chen Machinery better future.