Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.13696545
- Product Categories
- Friendly Links
Information Name: | Disc feeder tender | Oswald Chen Machinery (certified) | disc feeder |
Published: | 2015-07-11 |
Validity: | 0 |
Specifications: | Any |
Quantity: | |
Price Description: | |
Detailed Product Description: | Idling disc feeder experiment two hours, disc feeder tender, and check the following items in accordance with the instructions on the use of technology requirements: (1) Check the rotation direction of the disk, in order to determine whether the correct motor cable (2) Check for periodic noise and vibration, check for leakage. (3) Check the bearing temperature and oil temperature conditions. (4) Adjust the blade to the two extreme positions, clearance check whether the blade and the disc It should be carried out after the completion of the empty load test load test between 15-25 mm 8 hours, check for anomalies, disc feeder 600, and check the adjustment means is flexible and reliable, disc feeder industry news, everything is normal only after the production. The main parts repair exchange standards. 1) Replace the blade wear 1/2. 2) replacement of the liner 2/3 deformed or worn. 3) reducer gears, bearings replace the technical requirements according to common standards implemented. 4) The adjustment formula to replace the screw, wire mother. Pre-commissioning checks. ① Check whether the remnants of the inner tray. ② Check the operation method is correct. ③ whether the card manually phenomenon hit phenomenon. Empty load test. ① empty load test one hour. ② during operation check card, grinding, touch, hit phenomenon, confirmed that no abnormalities after load test. Load test four hours, disc feeder, check the operation. ① disc operation should be smooth no vibration, no yaw. ② shutter blade and screw can be flexibly adjusted. ③ rolling bearing temperature does not exceed 70 ℃. ④ reducer temperature does not exceed 40 ℃. ⑤ disc liner should be smooth, without seams up the layout, the level should be greater than about 3mm, meet these requirements before acceptance. Disc feeder tender | Oswald Chen Machinery (certified) | disc feeder provided by Xinxiang Chen Machinery Co. Oswald. Oswald Xinxiang Chen Machinery Co., Ltd. (www.oweicjx.com) is an industry leader in Henan Xinxiang, transportation equipment, over the years, the company is implementing the scientific management, innovation and development, the principle of honesty and trustworthiness, and satisfy customer needs. In Oswald Chen mechanical leadership with the staff warmly welcome all inquiries negotiations to create Oswald Chen Machinery better future. |
Admin>>>
You are the 19681 visitor
Copyright © GuangDong ICP No. 10089450, Oswald Chen Xinxiang Machinery Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 19681 visitor
Copyright © GuangDong ICP No. 10089450, Oswald Chen Xinxiang Machinery Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility